This is a sealer/ grout release that is intended to seal,
but maintain the natural un-sealed look.
Protect against water,and stains with its unique anti-chalking formula.
404 Penetrating Sealer is listed online by the Southern California Air Quality Management District
as a "SUPER COMPLIANT" product !
 

This is a hybrid formula of siloxane, and complex siliconates.
It is water-based.
No more overpowering, harmful solvent odors.
It is low v.o.c. (volitle organic compounds)
Complies with ALL California's A.Q.M.D. requirements.

404 out-performed all of the other siloxane, and potassium silicate type invisible sealers tested. If you have not used 404 Penetrating Sealer, try some on an un-installed test sample, to see that it provides the look, protection, and any surface characteristics you desire.

If you have used 404, but have not used it on the type of substrate you are intending to use it on, then again test it. 404 may slightly lighten, or darken the surface, but will maintain the un-finished look.

When you are looking for stain, and water protection; do not use 404. Start with, and finish with our Invisi-Guard Impregnating Sealer. Looking to have a semi-gloss look, then start with, and finish with our 646 Plus Semi-Gloss. Want a very high gloss finish, then start, and finish with  686 Plus Ultra High Gloss.

DIRECTIONS: When applying 404, clean surface well, and let dry completely. Then apply 404 with a brush, cloth, sprayer, or roller. Work liberally into surface and let dry.
Apply another coat for further protection. The surface is well sealed when you re-apply 404, and the surface does not darken like it is getting wet. If sealer is beading on surface; wipe excess clean, and let dry. Do not leave puddling. Maximum curing time is 48 hours, although excellent 
water resistance will be apparent, within a short period of time.

COVERAGE: One gallon of 404 Penetrating Sealer / Grout Release will cover between 150 to 300 square feet, depending on how porous the surface is. This is the amount of sealer we estimate it will take to completely seal a given area, when applied, as per the above directions.

LIMITS: Not for use on marble, or granite. Do not use below 55 degrees F. When testing for desired results, be sure to allow 48 hours for curing.

CAUTION: Use rubber gloves when applying. Avoid contact with skin. Prolonged exposure to vapors may be harmful, or fatal. Use in well ventilated area. In conditions which do not permit good ventilation; use of a breathing apparatus is recommended. When in doubt, 
seek professional assistance.

NOTICE: Our only obligation shall be to refund the purchase price, or replace any of our product proven to be defective. Beyond the purchase price of materials supplied by us, we assume no liability for damages of any kind, and the user accepts the product "as is", and without warranties, either expressed or implied. The suitability of this product for an intended use shall be solely up to the user.